Let's play with the technology

Search
Skip to content
  • About
  • Similar pages
  • Cookies and Privacy Policy

Turning on camera in raspi-config

Tuesday January 7th, 2020 1233 × 407 Raspberry Pi Zero – updating the gate opener with water meter OCR
Turning on camera in raspi-config

Turning on camera in raspi-config

Turning on camera in raspi-config

Previous Image
Next Image

Embedded devices: Linux on Raspberry Pi, ESP 8266 and others

Language:

  • Polski
  • English

RSS blog.jokielowie.com

  • Raspberry Pi Zero – updating the gate opener with water meter OCR 7 January 2020
    Introduction My Raspberry Pi 1B+ has been opening garadge and letting me know of the conditions for work nearly 4 years. Recently I’ve decided to replace this 2014 small board computer (SBC) with newer version. I’ve also looked at better (the principle Keep it Small and Simple – KISS) solutions that became available – i.e. […]
  • Domoticz part 5: Grafana, InfluxDB, Telegraf – beautiful and easy graphs 10 July 2019
    Grafana is the answer to the nagging question we’be been asking ourselves over the years – how to quickly and nicely present our data gathered from devices. InfluxDB on the other hand is the database that is as easy and simple to use, thus making it an ideal candidate for this job. Let me show […]
  • Raspberry Pi 4 – a surprise but also radical change in the project’s direction 25 June 2019
    The new Raspberry Pi 4 is a very interesting change in the direction of the original project. Why? I will summarize what we already know, right after the premiere: new CPU, with much more computing power – not because of the clock, but ARM cores in version A72. The execution process – 28nm, is perhaps […]
  • This entry is only valid for Polish electrical energy provider – Tauron… 4 May 2019
    …but if you really think this is usefull to you – let me know, so I have an excuse to translate it! The post This entry is only valid for Polish electrical energy provider – Tauron… first appeared on Let's play with the technology.
  • 0.96″ OLED SSD1306 display and Raspberry Pi 30 March 2019
    [Update: 2019-03-30] Our reader, Paweł Kopacz, noticed that pip, setuptools and wheel are also needed Quick and visually compelling projects don’t come easy ? Naaah, just like last time – let’s get on a very nice and easy project – attaching display onto Raspberry Pi. As we were chating on the Malinowe Pi Group, Hubert […]
  • [UPDATED 03-02-2018] SMOG sensor – 2,5 and 10 micro meter particles 8 February 2018
    [Last changes]: 07-11-2017: Additional data from richer stations, Open-Smog Integration 20-12-2017: USB power control on Raspberry Pi 3, thanks to reader 02-03-2018: New API from GIOŚ Poland SMOG is common nowadays in big cities. Let’s put together a working, precise own SMOG sensor, first for the 2,5 and 10 μm size particles. There is one issue […]
  • ESP8266 and SMOG part four: Sleep mode for SDS011 in ESPEasy MEGA 2.0 27 January 2018
    The SMOG sensor project became a bit complex – along with the addition of relay. In the mean time thanks to Gijs Noorlander and yours- since you build, ask and use the sensor – we got updated version of ESPEasy MEGA 2.0 for ESP8266. Why the new blog entry? That’s because Gijs added the included […]
  • Measuring air quality using Bosch BME680 and AMS CCS811 – IAQ, TVOC, eCO2 16 December 2017
    Measurement of basic environmental data in our apartment – temperature and humidity is one of the most popular applications of commonly available sensors for Raspberry Pi (RPi), Orange Pi (OPi) and ESP8266. Then we added ability to measure the SMOG otuside and inside and today we will deal with two new and very interesting air […]
  • Domoticz part 8 – Stable instance of Domoticz, 24/7/365 mode – high availability at home 6 December 2017
    As a result, a both fresh and advanced user finds himself in a situation where the system – ceases to work at all, or requires frequent restarts, or worse causes quick degradation of the main storage device – which is often (micro) SD card. Is there a simple and effective solution to increase Domoticz’s availability […]
  • ESP8266 and SMOG part three: sensor protection, cloud upload 20 November 2017
    Język/Language: Polski English Last time we updated our simple SMOG sensor with display (OLED) and added BME 280 to verify the SMOG measurements – the environmental sensor – as we know that humidity over 70% can add up to the SMOG. It’s time now to protect our sensor. Why do we need sensor protection? Smog sensor […]

Recent Comments

  • Łukasz C. Jokiel on ESP8266 and SMOG part three: sensor protection, cloud upload
  • Tadek K on ESP8266 and SMOG part three: sensor protection, cloud upload
  • Łukasz C. Jokiel on ESP8266 and SMOG part three: sensor protection, cloud upload
  • Tadek K on ESP8266 and SMOG part three: sensor protection, cloud upload
  • Łukasz C. Jokiel on ESP8266 and SMOG part four: Sleep mode for SDS011 in ESPEasy MEGA 2.0

Tags

  • android vpn
  • armv7
  • automation
  • boblight
  • domoticz
  • esp8266
  • EzCap
  • Fushicai
  • garaż
  • grabber
  • grafana
  • graphs
  • gsm
  • hdmi splitter
  • hyperion
  • influxdb
  • ios vpn
  • led effect
  • light effect
  • Linux
  • neoway m590
  • nodemcu
  • nova fitness
  • oled display
  • openelec
  • open garadge
  • OpenVPN
  • orange pi
  • pppd
  • raspberry pi
  • raspbmc
  • relay
  • RGB LED
  • sdr
  • sds011
  • smog
  • ssd1306
  • STK1160
  • telegraf
  • uart
  • video player
  • vpn
  • wemos d1 mini
  • XBMC
  • łukasz c. jokiel
Cookies and Privacy Policy Proudly powered by WordPress
sponsored