Let's play with the technology

Let's play with the technology

Search

Primary Menu

Skip to content
  • Autor
  • Podobna tematyka
  • Polityka prywatności oraz ciasteczek

Embedded devices: Linux on Raspberry Pi, ESP 8266 and others

pic

07/01/20 2560 × 1920 Raspberry Pi Zero – aktualizujemy otwieranie bramy o nowy sprzęt oraz rozponawanie wskazań licznika (OCR)

Full raw meter picture

Previous Image

Język:

  • Polski
  • English

Najnowsze komentarze

  • Łukasz C. Jokiel o ESP8266 i SMOG część trzecia: ochrona czujnika, wysyłanie danych do własnej chmury
  • Tadek K o ESP8266 i SMOG część trzecia: ochrona czujnika, wysyłanie danych do własnej chmury
  • Łukasz C. Jokiel o ESP8266 i SMOG część trzecia: ochrona czujnika, wysyłanie danych do własnej chmury
  • Tadek K o ESP8266 i SMOG część trzecia: ochrona czujnika, wysyłanie danych do własnej chmury
  • Łukasz C. Jokiel o ESP8266 i SMOG część czwarta: czujnik na lata dzięki ESPEasy 2.0 mega (SDS011 sleep mode)

RSS blog.jokielowie.com

  • Raspberry Pi Zero – updating the gate opener with water meter OCR 7 stycznia 2020
    Introduction My Raspberry Pi 1B+ has been opening garadge and letting me know of the conditions for work nearly 4 years. Recently I’ve decided to replace this 2014 small board computer (SBC) with newer version. I’ve also looked at better (the principle Keep it Small and Simple – KISS) solutions that became available – i.e. […]
  • Domoticz part 5: Grafana, InfluxDB, Telegraf – beautiful and easy graphs 10 lipca 2019
    Grafana is the answer to the nagging question we’be been asking ourselves over the years – how to quickly and nicely present our data gathered from devices. InfluxDB on the other hand is the database that is as easy and simple to use, thus making it an ideal candidate for this job. Let me show […]
  • Raspberry Pi 4 – a surprise but also radical change in the project’s direction 25 czerwca 2019
    The new Raspberry Pi 4 is a very interesting change in the direction of the original project. Why? I will summarize what we already know, right after the premiere: new CPU, with much more computing power – not because of the clock, but ARM cores in version A72. The execution process – 28nm, is perhaps […]
  • This entry is only valid for Polish electrical energy provider – Tauron… 4 maja 2019
    …but if you really think this is usefull to you – let me know, so I have an excuse to translate it! The post This entry is only valid for Polish electrical energy provider – Tauron… first appeared on Let's play with the technology.
  • 0.96″ OLED SSD1306 display and Raspberry Pi 30 marca 2019
    [Update: 2019-03-30] Our reader, Paweł Kopacz, noticed that pip, setuptools and wheel are also needed Quick and visually compelling projects don’t come easy ? Naaah, just like last time – let’s get on a very nice and easy project – attaching display onto Raspberry Pi. As we were chating on the Malinowe Pi Group, Hubert […]
  • [UPDATED 03-02-2018] SMOG sensor – 2,5 and 10 micro meter particles 8 lutego 2018
    [Last changes]: 07-11-2017: Additional data from richer stations, Open-Smog Integration 20-12-2017: USB power control on Raspberry Pi 3, thanks to reader 02-03-2018: New API from GIOŚ Poland SMOG is common nowadays in big cities. Let’s put together a working, precise own SMOG sensor, first for the 2,5 and 10 μm size particles. There is one issue […]
  • ESP8266 and SMOG part four: Sleep mode for SDS011 in ESPEasy MEGA 2.0 27 stycznia 2018
    The SMOG sensor project became a bit complex – along with the addition of relay. In the mean time thanks to Gijs Noorlander and yours- since you build, ask and use the sensor – we got updated version of ESPEasy MEGA 2.0 for ESP8266. Why the new blog entry? That’s because Gijs added the included […]
  • Measuring air quality using Bosch BME680 and AMS CCS811 – IAQ, TVOC, eCO2 16 grudnia 2017
    Measurement of basic environmental data in our apartment – temperature and humidity is one of the most popular applications of commonly available sensors for Raspberry Pi (RPi), Orange Pi (OPi) and ESP8266. Then we added ability to measure the SMOG otuside and inside and today we will deal with two new and very interesting air […]
  • Domoticz part 8 – Stable instance of Domoticz, 24/7/365 mode – high availability at home 6 grudnia 2017
    As a result, a both fresh and advanced user finds himself in a situation where the system – ceases to work at all, or requires frequent restarts, or worse causes quick degradation of the main storage device – which is often (micro) SD card. Is there a simple and effective solution to increase Domoticz’s availability […]
  • ESP8266 and SMOG part three: sensor protection, cloud upload 20 listopada 2017
    Język/Language: Polski English Last time we updated our simple SMOG sensor with display (OLED) and added BME 280 to verify the SMOG measurements – the environmental sensor – as we know that humidity over 70% can add up to the SMOG. It’s time now to protect our sensor. Why do we need sensor protection? Smog sensor […]

Archiwa

  • Styczeń 2020
  • Lipiec 2019
  • Czerwiec 2019
  • Maj 2019
  • Marzec 2019
  • Luty 2018
  • Styczeń 2018
  • Grudzień 2017
  • Listopad 2017
  • Październik 2017
  • Wrzesień 2017
  • Maj 2017
  • Kwiecień 2017
  • Styczeń 2017
  • Październik 2016
  • Czerwiec 2016
  • Kwiecień 2016
  • Marzec 2016
  • Luty 2016
  • Październik 2015
  • Wrzesień 2015
  • Lipiec 2015
  • Sierpień 2014
  • Luty 2014

Tagi

android vpn armv7 automation boblight domoticz esp8266 EzCap Fushicai garaż grabber grafana graphs gsm hdmi splitter hyperion influxdb ios vpn led effect light effect Linux neoway m590 nodemcu nova fitness oled display openelec open garadge OpenVPN orange pi pppd raspberry pi raspbmc relay RGB LED sdr sds011 smog ssd1306 STK1160 telegraf uart video player vpn wemos d1 mini XBMC łukasz c. jokiel
Proudly powered by WordPress || Themed by Ridizain
sponsored